InLei S-Powder - Sachets

PRODUCT DETAILS

S-Powder Thickening Powder for Lash & Brow Lamination by InLei

The S-Powder by InLei is an advanced professional additive designed for Korean lamination treatments, helping lash and brow artists achieve superior control, precision, and results.

This innovative powder works by thickening and gelling lamination solutions, making them more adhesive and easier to work with, without altering the effectiveness of active ingredients.

Perfect for both lash lifts and brow lamination, S-Powder helps keep hairs securely in place throughout the treatment while maintaining proper hydration levels. It can be compatible with the InLei system, including the Lash Filler 25.9 line, as well as cysteamine-based lamination solutions.

Enriched with Sodium Hyaluronate, this formula supports hydration, elasticity, and fiber integrity during chemical processing, helping prevent dryness while maintaining softness and flexibility.

Important: When using S Powder with InLei 25.9, it is essential to follow the instructions to ensure safe application.

Size: 4 sachets x 1g

PROFESSIONAL USE ONLY

Usage: 

• 4 sachets of 1g = up to 80 treatments
• both steps 1 & 2 = up to 40 treatments

FOR PROFESSIONAL USE ONLY

BENEFITS

• VEGAN OK certified product
• Compatible with the InLei Lash Filler 25.9 line
• Created for cysteamine-based products
• Maintains the correct level of hair hydration

HOW TO USE

Take the necessary amount of product and mix as follows: 

• First lamination solution: 10-20% powder + 80-90% solution
• Second lamination solution: 30% powder + 70% solution

Proportions may vary depending on lash/brow structure.

KOREAN METHOD USING INLEI 25.9 LASH LIFT SYSTEM

With Flat Under Eye Patch

1) Mix 80-90% InLei 25.9 Form 1 with 10-20% S-Powder. Apply mixture to lashes and gently press the lashes onto the patch, making sure to cover the surface evenly. Leave 1mm from roots. For stronger and curlier hair, you can add 10-20% Powder. 

Note: this method has longer processing time because lashes are resting on the patch compared to when they are stretched on the shield. The patch allows the lashes to be in a natural position and absorbs solution more slowly.

2) After 3-5 minutes, remove solution from tips with Flex Beauty Lint Free Applicators. Go over tips again with InLei Saline Solution. 

3) Check the hair readiness and perform a lash control check. There is no recommended processing times which is why it is essential to perform lash control checks. 

Note: time how long you left solution 1 on for.

4) Prepare Step 2 - mix 30% of S-Powder with 70% of Fix 2. Consistency should be soft and lump free.

5) Position the shield of choice on the eyelid. Gently wrap/stretch lashes with the prepared step 2 mixture. Lashes are delicate at this stage, so you must be gentle. You can use the Helper Tool, Tiziano brush and a microfibre brush. 

6) After, apply InLei Lash Stopper Compensator and leave on for half the time of the first solution.

Note: make sure there is enough product. If necessary, add more Fix 2 (with or without S-Powder).

7) After processing time, remove solution and continue with traditional protocol.

8) Prepare the InLei tint mixture in 1:1 tint and developer ratio. Leave on for 6-12 minutes then remove. 

9) Apply Lash Filler 3 and wait until it fully absorbs.

10) Cleanse lashes with InLei Mousse Magica.

11) Apply Lash Molecular 4 until absorbed. No rinsing required.

With Shield or Flat Pad

1) Mix 80-90% InLei 25.9 Form 1 with 10-20% S-Powder. Apply mixture to lashes and gently pull the lashes back onto a shield or a flat silicone pad. 

2) After 3-5 minutes, remove solution from tips with Flex Beauty Lint Free Applicators. Go over tips again with InLei Saline Solution. 

3) Check the hair readiness and perform a lash control check. There is no recommended processing times which is why it is essential to perform lash control checks. 

Note: time how long you left solution 1 on for.

4) Prepare Step 2 - mix 30% of S-Powder with 70% of Fix 2. Consistency should be soft and lump free.

5) Position the shield of choice on the eyelid or keep shield on eyelid if used for the first step. Gently wrap/stretch lashes with the prepared step 2 mixture. Lashes are delicate at this stage, so you must be gentle. You can use the Helper Tool, Tiziano brush and a microfibre brush. 

6) After, apply InLei Lash Stopper Compensator and leave on for half the time of the first solution.

Note: make sure there is enough product. If necessary, add more Fix 2 (with or without S-Powder).

7) After processing time, remove solution and continue with traditional protocol.

8) Prepare the InLei tint mixture in 1:1 tint and developer ratio. Leave on for 6-12 minutes then remove. 

9) Apply Lash Filler 3 and wait until it fully absorbs.

10) Cleanse lashes with InLei Mousse Magica.

11) Apply Lash Molecular 4 until absorbed. No rinsing required.

TIPS

When using 25.9 Lash Lift System for Korean Method:

• Remove solution from tips after 3-5 minutes
• Always follow with Lash Filler 3 and Mousse Magica 
• Do not use plastic film

INGREDIENTS

Hydroxyethylcellulose, Hydroxyethyl Acrylate/Sodium Acryloyldimethyl Taurate Copolymer,Polyquaternium-10, Polysorbate 60, Sorbitan Isostearate, Sodium Hyaluronate, Ethylhexylglycerin,Disodium Phosphate, Sodium Phosphate, Phenoxyethanol

The formula is enriched with SODIUM HYALURONATE : its presence helps maintain the correct level of hydration of the fiber during the lamination treatment. It helps preserve the elasticity and softness of the lashes, supporting their comfort even during the technical phases of the protocol. It promotes a sensation of lightness and flexibility, counteracting possible dehydration due to chemical processes. This targeted support complements the technical performance of the treatment, with attention to the quality of the fiber.

Made in Italy