ELAN Dense Facial Hair Wax

Dense Wax - Professional Facial Hair Removal Wax by Elan 

 

Effortlessly remove facial hair in a breeze, with this professional grade hair removal wax that comfortably eliminates unwanted hair leaving the skin feeling velvety smooth. 

 

The Dense Wax by Elan is a professional black film wax that is designed for the effective removal of various types of unwanted facial hair, including coarse, medium thickness, and fluffy hairs. 

 

With a low melting point temperature, the wax ensures a comfortable and gentle experience, prioritizing your skin's well being. The quick solidification of the wax significantly reduces the procedure time, and the elastic consistency ensures the comfort during its application to the relief zones of the face.

 

The wax can be applied and removed in various directions, regardless of the direction of growth. If necessary, waxing can be repeated 2-3 times, and is suitable for all skin types, including sensitive and delicate skin. 

 

Size: 100 g

Usage: 70 eyebrow corrections

 

FOR PROFESSIONAL USE ONLY

• Suitable for all skin types including sensitive and delicate skin
• Low melting point temperature
• Provides comfortable and gentle experience
• Effective removal of fine, coarse, medium or fluffy hairs
• Wax solidifies quickly 
• Stunning black wax colour

 

STEP-BY-STEP FACE HAIR REMOVAL PROCEDURE

 

1. Preparation for unwanted hair removal procedure

 

1a) Heat the wax up to a working temperature of 38-39°С.

 

Note: Non-compliance with the temperature regime can lead to irritation or skin damage.

 

1b) Use Elan Pre-Wax Refreshing Lotion before wax correction for skin cleansing and degreasing. Wipe the necessary areas of the skin using a cotton pad, soaked in lotion, immediately before starting the unwanted hair removal procedure. Leave until it is completely dry.

 

1c) If necessary, apply a small amount of talc to the skin in the area of depilation.

 

2. Wax application and unwanted hair removal

 

2a) Apply an even layer of wax to the skin using a spatula, regardless of the direction of hair growth.

 

Notes:

• During the application it is necessary to slightly pull the skin in the opposite direction to the spatula.
• For the convenience of tearing off the solidified wax, it is recommended to leave a small «petal» (that can be grabbed later) or fixate a working tool on the «petal».

 

2b) After solidifying (in 8-10 seconds) with a sharp move, remove the wax, after pulling the skin in the opposite direction of the tearing off.

 

Notes:

• Wax that is ready to be torn off should not be soft or be sticky to the hands when touched.
• The tearing off must be performed in the direction going away from yourself and parallel to the skin.
• After the wax has been torn off, there can appear slight redness on the skin, which is a normal skin reaction.
  

 

2c) Repeat the procedure on the next area in cases where this is necessary.

 

3. After unwanted hair removal procedure skincare

 

3a) Once the depilation is finished, use the regenerative serum after wax correction Elan After Wax Repair Serum for skincare and redness reduction. Apply the serum to the skin and leave until fully absorbed.

 

3b) Use Elan After Wax Protection Mask to narrow the pores after the procedure of unwanted hair removal and UV-rays protection. Apply a thin layer of the cream-mask – using massage movements – to the skin and leave until fully absorbed.

 

RECOMMENDATIONS BEFORE AND AFTER FACIAL HAIR REMOVAL

 

Before and after the facial hair removal procedure, please follow these recommendations:

 

• ! Avoid touching the skin in the hair removal zone for at least 30 minutes after the procedure.
• ! Refrain from applying any decorative cosmetics to the treated area for 12 hours following the procedure, including tonal foundations, BB/CC creams, and concealer.
• ! Do not subject the treated skin to aggressive cosmetic products or procedures, such as scrubs, peels, or laser treatments, for 24 hours after the procedure.
• ! Minimize sun exposure and UV ray exposure for 24 hours before and after the procedure to protect your skin.

 

RESTRICTIONS ON FACIAL HAIR REMOVAL PROCEDURE

 

There are absolute restrictions for the procedure of removing unwanted hair, including:

 

• ! Individual sensitivity to the ingredients.
• ! Presence of any skin irritations in the designated area for hair removal.
• ! Couperosis (pronounced capillary mesh), moles, and warts in the area where hair removal is intended.
• ! Recent application of aggressive cosmetic products to the skin in the hair removal zone, such as brow lamination, bleaching, etc.

Tips for waxing:

• Heat wax to 39-42 °C
• Use Pre-Wax Refreshing Lotion before waxing
• Use After Wax Repair Serum for skincare and redness reduction 
• Apply After Wax Protection Mask to narrow the pores after waxing 

Rosin, Glyceryl Rosinate, Paraffin, Beeswax, Paraffinum Liquidum, Parfum, Ci 77266

 

Made in Turkey